BABBITT INTERNATIONAL INCORPORATED

LS2000

Low-Cost Sensor


LS2100

Loop-Powered Sensor


LS6000

Basic Features Sensor


LS7000

Full-Featured Sensor


LS7000/2

Dual-Point Sensor


LS8000

Full-Featured Sensor with Remote Electronics


LS8000/2

Multi-Point Sensor with Remote Electronics


LT9000

Level Transmitter


Liquid Level Gauge
Magnetostrictive Level Transmitters
MLS-4EX

Multipoint Float Level Switch


Ultrasonic Level Transmitters
RADAR

RADAR Level Transmitter


FS10000

Dust Emission Flow Switch


FT4100

Dust Emission Flow Transmitter


L I Q U I D   L E V E L   G A U G E


Liquid Level Gauge safe for high-pressure, high-temperature, toxic or flammable fluids

The Babbitt LG-Series magnetic level gauge consists of a float chamber, a float, and an external indication device. The float chamber is basically a column of 2 1/2 inch pipe with process connections to match those of the storage tank, reactor, drum, column or other equipment where level is to be measured. These connections may be side couplings or flanges, or top and bottom flanges. Magnetic Liquid Level Gauge/Gage for Tank Level Measurement

The float moves up and down inside the chamber as the process level changes. The float type is determined by the process fluid specific gravity, pressure and temperature. Also, the materials of construction must be compatible with the process fluid. The float must be light enough to maintain buoyancy and have properties that allow it to withstand the pressure and temperature combination. Each float is engineered for proper buoyancy for each particular application for level or interface measurement. Magnetic Liquid Level Gauge/Gage for Tank Level Measurement

Contained inside the sealed float is a very strong magnet assembly. The indicator tube and scale assembly is attached to the outside of the float chamber. Inside the transparent, hermetically-sealed indicator tube is a light-weight magnetized indicator. This indicator is magnetically coupled with to the float and moves up and down inside the indicator tube as the float moves up and down with the rising and falling of the liquid level in the vessel. The indicator is brightly colored and allows the operator to read the level from 100 feet away. The only moving parts are the float and the indicator. An optional Flipper/Roller style indicator is also offered.

The basic Babbitt magnetic level gauge offers simple visual indication. By using the LT1 transmitter, a 4-20mA signal can be sent to a remote location for indication or control functions. Additionally, level switches can be added, external to the float chamber, for alarm or control. These switches can easily be moved up or down the chamber while not disturbing the process.

The Babbitt LG-series level indicator uses a time-proven method to indicate liquid levels which offers many advantages over conventional sight glasses or electronic level sensors. In cases of extreme pressures and temperatures, or corrosive and hazardous materials, these gauges perform where others fail thus eliminating dangerous situations for plant personnel. The standard material for the LG-Series float chamber is 316 Stainless Steel, however it can be made of any non-magnetic material that is compatible with the media being measured.

Advantages of Level Gauges:

These level gauges may be widely applied for many kinds of extreme applications. They may also be used in interface applications such as foam/liquid and oil/water.

Liquids
Interface
PDF Brochure - These are large files and download speeds vary.
Watch our Magnetic Level Gage video:

We invite you to contact us with your next application.